Micro-star-computer MS- 9130 v1.x User Manual download pdf (Page 23)

2-10

MS-9130 Workstation Mainboard

JPW1

SSI 8-Pin Power Connector: JPWR1

This connector is used to provide the power output to the CPU.

PIN SIGNAL

5 +12V

6 +12V

7 +12V

8 +12V

PIN SIGNAL

1 GND

2 GND

3 GND

4 GND

JPWR1 Pin Definition

ATX 12V Power Connector: JPW1

You may also choose to use ATX 12V power supply. This 12V power

connector is used to provide power to the CPU.

PIN SIGNAL

1 GND

2 GND

3 12V

4 12V

JPW1 Pin Definition

JPWR1

MSI Reminds You...

For this JPWR1 power connector, you may use the 4-pin ATX

power supply or 8-pin SSI power supply as you like. If you’d like

to use the SSI power supply, please remove the sticker (covered

the 1, 2, 5 and 6 pins, shown as the photo below) marked “SSI

ONLY” on the JPWR1 power connector to insert the SSI power

supply in the proper orientation for correct alignment. If you’d

like to use the ATX power supply, please just insert your power

supply in the rest pins without removing the sticker.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 81 82

No comments

Micro-star-computer MS- 9130 v1.x User Manual Page 23