Micro-star-computer MS- 9130 v1.x User Manual download pdf (Page 17)

2-4

MS-9130 Workstation Mainboard

1. Make sure that the computer

is turned off, and the power

cord disconnected before in-

stalling the CPU.

2. Pull the lever sideways away

from the socket, and raise it up

to a 90-degree angle.

3. Locate the cut edge of the

CPU. When the CPU is in-

stalled into the socket, this cut

edge should be aligned with

the corner marking an arrow on

the Socket 940.

Please note that the CPU can

only fit in a correct orientation,

DO NOT use force to install

the CPU into the socket.

4. Place the CPU onto the socket

and press it down firmly into

the socket. The pins of the

CPU should be embedded into

the socket completely.

5. Close the lever to secure the

CPU. Do not close the level

until the CPU’s pins are fully

inserted; otherwise, the pins

may be damaged.

CPU Installation Procedures for Socket 940

Open Lever

Lever

Press down

the CPU

Cut edge

Corner marking

an arrow

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

No comments

Micro-star-computer MS- 9130 v1.x User Manual Page 17